2016
75
TRANSPORTING YOUR MOTORCYCLE
For safe transportation of your new motorcycle, please adhere to the following guidelines:
Please use the following checklist when arranging your Mini-Motorbike transport requirements:
1. Use an approved motorbike trailer loading ramp.
2. Ensure that the engine is not running/off and that the key contact is OFF. Always use approved motorbike tie-
down straps. Do not use any standard ropes as ropes have a tendency to loosen and may cause the motorbike
to shift or even fall out of the truck or trailer, subsequently. Leading to a serious accident.
3. Make sure that you are using wheel chocks to secure the front wheel of your Mini-Motorbike to a mounting
surface such as a trailer or truck bed. Attach the straps to the tie down points on your Mini-Motorbike. Using
tie-downs, wrap one end around one side of the handlebar, then attach another tie-down to the opposite side
of the handlebar and front corner of the trailer.
4. Tighten the straps until the front suspension is approximately half way compressed.
5. Ensure that the tie-down strap is wrapped around the rear frame of the Mini-Motorbike.
To Next Page
Loading...
