YCF 50E - Motorcycle Storage and Retrieval; Procedure for Removing from Storage

2016
79
English
MOTORCYCLE STORAGE
Warning
Procedure for removing your Mini-Motorbike from storage
After your Mini-Motorbike has been stored for any length of time, it is imperative to follow these
guidelines to ensure a proper return to service:
1. Remove the cover. Clean the entire motorbike. Depending on storage conditions you may be able to
wipe down the Mini-Motorbike with a damp cloth to remove any loose dust.
2. Lubricate the drive chain, using the MINERVA OIL LUB’ CHAINE spray.
3. Test ride the Mini-Motorbike at low speeds to ensure that all the functions and components are still
functioning properly.
4. The battery has to be maintained and cleaned before, before storing it, charge it and then charge it
two hours every two months during its storage. It has to be kept in a fresh place (10º à 21ºC), dry.
Avoid sun light.