2
W60B Package Contents
1. Connect the base station power and the network using method a or method b.
a. AC Power Option b. PoE (Power Over Ethernet) Option
Note:
• If you choose method a, use Yealink-supplied power adapter (5V/600mA). A third-party
power adapter may damage the base station.
• If you choose method b, you do not need to connect the power adapter. Make sure the
hub/switch is PoE-compliant.
2a. (Desktop Installation) Attach and remove the base stand.
Attach the Base Stand Remove the Base Stand
2b. (Wall-Mount Installation) Attach the base station.
Remove the snap-fits from the
holes horizontally.
M
A
C
S
N
M
A
C
S
N
M
A
C
S
N
Assembling the DECT Phone
Align the snap-fits with the corresponding holes
and push forward, snapping them into the holes.
MAC
SN
59mm
M
A
C
SN
E
N
G
L
I
S
H
To Next Page
Loading...
