Package contents
Note: We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result
in reduced performance.
Assembling the DECT IP station
1. Connect the base station power and the network using method a or b.
b. PoE (Power over Ethernet) option
Note:
•
If you choose method a, use Verizon supplied power adapter (5V/0.6A). A third-party power adapter may damage the base station
•
If you choose method b, you do not need to connect the power adapter. Make sure the hub/switch is Power over Ethernet (PoE)
compliant2a. (Desktop Installation) Attach and remove the base stand.
Align the snap-fits with the corresponding holes
and push forward, snapping them into the holes.
Remove the snap-fits from the holes horizontally.