Need help?Do you have a question about the Yealink MP58 and is the answer not in the manual?
General| Display diagonal | 7 \ |
|---|---|
| Touchscreen type | Capacitive |
| Display resolution | 1024 x 600 pixels |
| Number of simultaneous touchpoints | 5 |
| Graphical user interface (GUI) language | Multi |
| Caller ID | - |
| Lines quantity | - lines |
| Phonebook capacity | - entries |
| Mounting | Desk |
| Handset type | Wired handset |
| Product type | IP Phone |
| Product color | Gray |
| Bluetooth version | 4.2 |
| Security algorithms | HTTPS, MD5, TLS |
| Networking standards | IEEE 802.1x, IEEE 802.3af |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN interface type | Gigabit Ethernet |
| Supported network protocols | IPv4/IPv6, SNTP |
| Compatible products | Skype for Business |
| Operating system version | 9.0 |
| Operating system installed | Android |
| RJ-9 ports quantity | 2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 10 - 95 % |
| Voice codecs | G.722, AGC, G.729A, AJB, G.729B, PLC, SILK, G.723.1, VAD, G.711alaw, G.726, iLBC, CNG, G.711ulaw |
| Cables included | LAN (RJ-45) |
| Number of handles included | 1 pc(s) |
| Master (outer) case width | 303 mm |
| Master (outer) case height | 342 mm |
| Master (outer) case length | 680 mm |
| Master (outer) case weight | 9100 g |
| Harmonized System (HS) code | 85171800 |
| Master (outer) case net weight | 8500 g |
| Quantity per master (outer) case | 5 pc(s) |
| USB output current | 0.5 A |
| AC adapter input voltage | 100 - 240 V |
| AC adapter output current | 2 A |
| AC adapter output voltage | 5 V |
| Power consumption (typical) | 7 W |
| Power consumption (Power over Ethernet (PoE)) | 7.6 W |
| Certification | CE, FCC, RoHS, ISO 9001, CCC, REACH |
Weight and Dimensions| Depth | 196 mm |
|---|---|
| Width | 259 mm |
| Height | 164 mm |
| Package depth | 324 mm |
| Package width | 293 mm |
| Package height | 128 mm |
How to switch between handset, speakerphone, and headset modes during calls.
Procedures for initiating calls on different phone models.
Instructions for dialing numbers on Yealink phones.
Dialing emergency numbers without unlocking the device.
Methods to accept incoming calls.
Procedures to terminate or decline a current call.
Transferring calls without prior consultation.
Transferring calls after speaking with the recipient.
Automatically forwarding all incoming calls to voicemail.
Redirecting calls to a specific contact or phone number.
Redirecting calls to designated delegates.
Setting up forwarding for calls that are not answered.
Temporarily pausing an active call.
Controlling the microphone input during calls.
Placing calls on cloud hold for later retrieval.
Placing calls on hold in the Teams service.
Preventing calls from unknown numbers.
Steps to set up a delegate for call handling.
Redirecting incoming calls to delegates.
Setting up forwarding for unanswered calls to delegates.
Making calls for oneself or another user.
Starting and managing immediate meetings.
Steps to start a conference call.
Creating new meetings directly on the phone.
Entering a scheduled meeting.
Starting and stopping call or meeting recordings.
Initiating the recording of a meeting.
Terminating an ongoing meeting recording.
Accessing and managing voicemails stored in the cloud.
Playing and interacting with cloud voicemails.
Connecting the phone to a PC using Bluetooth.
Setting a personal identification number to secure the phone.
Activating the phone's lock feature.
Procedures for unlocking the phone using the PIN.
Steps to establish a connection with Bluetooth devices.
Manually establishing a connection to a Wi-Fi network.
Adding Wi-Fi networks not detected by scanning.
Using WPS for simplified Wi-Fi setup.
Establishing Wi-Fi connection using a PIN method.
Logging into Teams on the phone as a guest.
Exiting the guest user session.
Accessing Teams features via CAP or meeting accounts.
Logging out from a CAP account.
Configuring phones in a cascaded layout.
Prerequisites for setting up cascaded mode.
Steps to create a cascaded group on the phone.
Connecting a phone to an existing cascaded group.
Finding available cascaded groups.
Entering the PIN to join a primary phone.
Creating and configuring a paging group.
Restarting the phone to resolve issues or for updates.
Restoring the phone to its original factory configuration.
Steps to physically connect the EXP50 expansion module.
Updating the UVC30 camera firmware to the latest version.
Pairing the CPW65 with the phone for audio input.
To Next Page
