use, we recommend you charge the CPW65 even when the battery is full.
ProcedureProcedure
1. Put the CPW65 on the charging cradle.
2. Connect the charging cradle to the USB port on the phone using a USB cable.
During charging, the battery LED indicator on the CPW65 glows solid red. When the battery capacity reaches
100%, the battery LED indicator on the CPW65 will glow solid green.
Turn the CPW65 On or OffTurn the CPW65 On or Off
To use the CPW65 as the external audio input device, you need to turn the CPW65 on first.
ProcedureProcedure
1. You can do the following to turn on the CPW65:
Put the CPW65 on a charging cradle or connect to the charging cable, the CPW65 starts up automatically.
If you do not charge the CPW65, long tap on the CPW65 for 3 seconds.
The battery LED indicator glows green for one second and then goes out.
2. To turn off the CPW65, long tap on the CPW65 until the battery LED indicator glows red for 3 seconds and
then goes out.
Register the CPW65Register the CPW65
To ensure good voice quality of the calls on the phones, you can register CPW65 with the phone to use the CPW65
as the external audio input device.
ProcedureProcedure
1. Tap the account avatar and go to SettingsSettings > Device SettingsDevice Settings > Wireless MicrophoneWireless Microphone.
NOTENOTE
If your system administrator disables the USB port of the phone, the phone cannot power to the USB port.
NOTENOTE
When the battery is below 10%, the battery LED indicator flashes red, and it will automatically shut down after
10 minutes of standby; when the low battery reaches 0%, it will automatically shut down.
TIPTIP
If you buy CP965-WirelessMic, the CPW65 is registered with the phone by default.
To Next Page
Loading...
