Obtaining the Address of Provisioning Server
35
2. Enter the URL, user name and password of the provisioning server in the Server
URL, User Name and Password fields (the user name and password are optional).
3. Click Confirm to accept the change.
Normally, many phone models may be deployed in your environment. To deploy many
phone models using a unified provisioning server, it is convenient for the administrator
to configure a unified provisioning server URL for different phone models. On the
provisioning server, many directories need to be configured for different phone models,
each with a unique directory name. Yealink IP phones support the following wildcards in
the provisioning server URL:
$PN: it is used to identify the directory name of the provisioning server directory
where the corresponding configuration files are located
$MAC: it is used to identify the MAC address of the IP phone.
The parameter “auto_provision.url_wildcard.pn” is used to configure the directory name
the configuration files located. For more information on the parameter, refer to
Description of Configuration Parameters in CFG Files on page 81.
When the IP phone obtains a provisioning server URL containing the wildcard $PN, it
automatically replaces the character $PN with the value of the parameter
“auto_provision.url_wildcard.pn” configured on the IP phone. When the IP phone is
triggered to perform auto provisioning, it will request to download the configuration files
To Next Page
Loading...
