Configuring the Update Mode
41
2. Click Autoprovision Now.
The IP phone will perform the auto provisioning process immediately.
You can activate more than one update mode for auto provisioning. For example, you
can activate the “Power On” and “Repeatedly” modes simultaneously. The IP phone
will perform the auto provisioning process when it is powered on and at a specified
interval.
The IP phone will perform the auto provisioning process when receiving a SIP NOTIFY
message which contains the header “Event: check-sync”. If the header of the SIP
NOTIFY message contains an additional string “reboot=true”, the IP phone will reboot
immediately and then perform the auto provisioning process. This update mode
requires server support.
To Next Page
Loading...
