Yealink IP Phones Auto Provisioning Guide
70
3. Right click the icon on the left of the main page, select Add folder from disk to
add the HTTP Server root directory.
4. Locate the root directory from your local system.
5. Check the server URL (e.g., http:// 10.2.11.101:8088/ProvisioningDir) by clicking
“Open in browser”.
Yealink IP phones also support the Hypertext Transfer Protocol with SSL/TLS (HTTPS)
protocol for auto provisioning. HTTPS protocol provides the encrypted communication and
secure identification. For more information on installing and configuring an Apache HTTPS
Server, refer t the network resource.
To Next Page
Loading...
