EasyManuals Logo

Yealink SIP-T31 Getting Started

Yealink SIP-T31
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Recovery Mode on Yealink IP phones
12
4. After a handset is registered, press (for W52P/W56P base) or (for W60B base) on the
handset to verify the current firmware version.
For W80DM/W80B
For the W80DM/W80B, there is no screen to show information for you. The W80DM/W80B uses
192.168.0.23 as its default IP address, so you need to configure a static IP address for your local PC
where you have the TFTP server installed.
Procedures:
1. Configure the static IP address on your local PC.
It must be configured as below:
2. Click OK twice to save the settings.
3. Long press and reconnect the power adapter to trigger the recovery mode.
The W80DM/W80B will download and upgrade the firmware from the TFTP server.

Other manuals for Yealink SIP-T31

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T31 and is the answer not in the manual?

Yealink SIP-T31 Specifications

General IconGeneral
Resolution132x64 pixels
Line Keys2
HD VoiceYes
Wall MountableYes
SIP Accounts2
Supported ProtocolsSIP v1 (RFC2543), v2 (RFC3261)
Display2.3" graphic LCD
Network Ports2x 10/100M Ethernet ports
PoEYes, Power over Ethernet (IEEE 802.3af), class 2
Headset SupportYes, RJ9 port
Voice CodecsG.711, G.726, iLBC
Local Phonebook1000 entries

Related product manuals