Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
258
Phone UI
Menu > Features > DSS Keys > Line Key X > Label
Parameter
linekey.X.extension
[1]
<y0000000000xx>.cfg
Descrip-
tion
For multicast paging:
It configures the channel of the multicast paging group.
For the BLF/BLF list/intercom feature:
It configures the pickup code.
Note: It is only applicable when “linekey.X.type” is set to 14, 16, 24 or 39.
Permitted
Values
For multicast paging:
0 to 31
For the BLF/BLF list/intercom feature:
String within 256 characters
Default
Blank
Supported
Devices
All phones except T19(P) E2 and CP920
Web UI
Dsskey > Line Key > Line KeyX > Extension
Phone UI
Menu > Features > DSS Keys > Line Key X > Channel or
Menu > Features > DSS Keys > Line Key X > PIN/ID or
Menu > Features > DSS Keys > Line Key X > Extension
Parameter
linekey.X.xml_phonebook
[1]
<y0000000000xx>.cfg
Descrip-
tion
It specifies a specific group/phone book when multiple groups/phone books are configured on the
phone.
For example, both Remote Phone Book 1 “Sell” and Remote Phone Book 2 “Market” are configured on
the phone, you can configure “linekey.X.xml_phonebook = 0” to specify the Remote Phone Book 1
“Sell” for the specific line key. The user can press this line key to access the Remote Phone Book 1
“Sell”.
Note: It is only applicable when “linekey.X.type” is set to 22 or 45.
Permitted
Values
Integer from 0 to 48
Default
0
Supported
Devices
All phones except T19(P) E2 and CP920
Web UI
Dsskey > Line Key > Line KeyX > Line
Parameter
features.flash_url_dsskey_led.enable <y0000000000xx>.cfg
Descrip-
tion
It enables or disables the LED indicator of the URL DSS key.
The LED indicator behavior depends on the response message from the server when you press the
URL DSS key on the phone.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except T19(P) E2 and CP920
To Next Page
Loading...
Need help?
General
