EasyManuals Logo

Yealink SIP-T53 User Manual

Yealink SIP-T53
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
5
âš«
If there is more than one call on hold, press
or
to select the desired call, and then press
or the
Resume
soft
key.
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
1. Press the
Transfer
soft key during an active call. The call is placed on hold.
2.
Enter the number you want to transfer to.
3. Press the
B Transfer
soft key.
Semi-Attended Transfer
1. Press the
Transfer
soft key during an active call. The call is placed on hold.
2.
Enter the number you want to transfer to, and then press
Send
.
3. Press the
Transfer
soft key when you hear the ring-back tone.
Attended Transfer
1. Press the
Transfer
soft key during an active call. The call is placed on hold.
2.
Enter the number you want to transfer to, and then press
Send
.
3. Press the
Transfer
soft key when the second party answers.
Call Forward
To enable call forward:
1. Press the
Menu
soft key when the phone is idle, and then select
Features
->
Call Forward
.
2.
Select the desired forward type:
Always Forward ---
Incoming calls are forwarded unconditionally.
Busy Forward ---
Incoming calls are forwarded when the phone is busy.
No Answer Forward ----
Incoming calls are forwarded if not answered after a period of time.
3. Enter the number you want to forward to. For
No Answer Forward,
press
or
to select the desired ring time to wait
before forwarding from the After Ring Time field.
4. Press the
Save
soft key to accept the change.
Call Conference
1. Press the
Conference
soft key during an active call. The call is placed on hold.
2.
Enter the number of the second party, and then press the
Send
soft key.
3. Press the
Conference
soft key again when the second party answers. All parties are now joined in the conference.
4. Press the
EndCall
soft key to disconnect all parties.
Note: You can split the conference call into two individual calls by pressing the
Split
soft key.
Speed Dial
To configure a speed dial key:
1. Press the
Menu
soft key when the phone is idle, and then select
Features
->
Dsskeys
.
2. Select the desired DSS key, and then press the
Enter
soft key.
3. Select
Speed Dial
from the
Type
field, select the desired line from the
Account ID
field, enter a label in the
Label
field
and then enter the number in the Value field.
4. Press the
Save
soft key to accept the change.
To use the speed dial key:
Press the speed dial key to dial out the preset number.
E
N
G
L
I
S
H

Other manuals for Yealink SIP-T53

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T53 and is the answer not in the manual?

Yealink SIP-T53 Specifications

General IconGeneral
NetworkDual-port Gigabit Ethernet
SIP Accounts12
Lines12
Stand IncludedYes
PoEYes (IEEE 802.3af)
USB Port1 x USB 2.0
Headset SupportRJ9 and USB
Audio FeaturesHD Voice
Expansion Module SupportYes, up to 3
Voice CodecsG.722, G.711
Network FeaturesIPv4/IPv6, VLAN, QoS
Local Phonebook1000 entries
MountingDesk mount, Wall mount
Power SupplyOptional
Weight1.1 kg
Resolution360 x 160

Related product manuals