Barracuda Phone System
Yealink T22P/T26P/T28P IP Telephone Quick Reference Guide 2 / 4
To access voicemail messages, press the Message button.
Depending on your system configuration, you may be prompted for a voicemail PIN number.
Call Hold
To place an existing call on hold, press the Hold button or the Hold soft key.
To retrieve a call on hold, press the Resume soft key.
If multiple calls are on hold, press the appropriate line key before pressing Resume.
Call Transfer
To transfer a call in progress, press the Tran or Transfer soft key.
Dial the destination number, then press the Send soft key.
When the destination party answers, announce the caller, and press Trans or Transfer again
to complete the transfer.
If there is no answer, press the Cancel soft key and then the Resume soft key to return to the
original caller.
3-Way Calling
Place (or receive) a call.
To add another party to the call, press the Conf soft key, dial the destination number, then
press the Send soft key.
When the party answers, press the Conf soft key again.
If there is no answer, press the Cancel soft key and then the Resume soft key to resume the
call.
Call Forwarding
When your phone is idle, press the Menu soft key, then select Features > Call Forward.
Select Always Forward, enter the destination, then press the Save soft key.
To cancel call forwarding, select Always Forward and the Switch soft key.
Volume Control
To Next Page
Loading...
Need help?
General
