Yealink W76P Quick Guide

RingCentral Desk Phones | Yealink W76P
© 1999 - 2022 RingCentral, Inc. All rights reserved.
2
Placing a call
Dial the number and do one of the following:
• Press .
• Press .
• Press to use the speakerphone.
Answering a call
Options:
• Lift the handset.
• Press to answer a call via speakerphone.
Placing a call on hold
• Press the Options soft key, then select Hold.
Retrieving a held call
• Press the Resume soft key to retrieve a held call.
Starting a conference call
1. While on an active call, press the Options soft key,
then select Conference.
2. Dial the extension of the other party that you would
like to add to the call.
3. Once the other party answers, press the Conf soft
key to merge the two calls.
Transferring a call
Warm Transfer:
1. While on an active call, press the Options
soft key.
2. Use the Navigation key to select Transfer.
3. Press .
4. Dial the extension or number of the other party
and press .
5. When the destination party answers, provide the
information, and confirm that they would like to
take the call.
6. Press or the Transfer soft key.
Blind Transfer:
1. While on an active call, press the Options soft
key.
2. Use the Navigation key to select Transfer.
3. Press .
4. Dial the extension of the other party, then press
or the Transfer soft key.
Voicemail Transfer
1. Press .
2. Dial followed by the extension
number.
3. Press or the Transfer soft key.
Parking a call
1. While on an active call,
press .
2. Listen to the prompt indicating that the call has been
parked. The prompt will also announce the extension
where the call is parked.
3. Note the park location. Example *802.
To retrieve a parked call, press , followed by the
park location.

Yealink W76P Specifications

General

Mounting	Desk/Wall
Device lock	Yes
Handset type	Wireless handset
Product type	IP mobile phone
Product color	Gray
Wi-Fi	-
Networking standards	IEEE 802.1af
Ethernet LAN data rates	10, 100 Mbit/s
Frequency band	1.9 GHz
Lines quantity	20 lines
Phonebook capacity	1000 entries
AC adapter input voltage	100 - 240 V
Number of function keys	6
Display diagonal	2.4 \
Display resolution	240 x 320 pixels
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	- pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Base dimensions	130 x 100 x 25.1 mm
Handset dimensions (WxDxH)	175 x 53 x 20.3 mm