Yealink W76P Setup Instructions

Yea
link DECT IP Phone (W76P)
– Set-up Instructions
1
Assemble handset(s) and base.
Assemble your base & all handset(s) by following the ‘Yealink
Quick Start Guide’ included in the W76P box until you reach the
Getting Started section.
You are ready for the next step
when all the LED lights on the base
are solid green.
2
Retrieve device username and password from the
self-service portal.
a. Go to the self-service portal:
onenz
.xport.co.nz/mydevice
or scan the QR code.
b. Log into the self-service portal using the login
details from your ‘One Business Online Portal
Login’ email.
c. The device username and password is required
for step 5.
Example format:
Device Username: 12000000_0001
Device Password: 123456
Note: Administrators may need to select the relevant User’s device from the Desk phone column ( ).

Yealink W76P Specifications

General

Mounting	Desk/Wall
Device lock	Yes
Handset type	Wireless handset
Product type	IP mobile phone
Product color	Gray
Wi-Fi	-
Networking standards	IEEE 802.1af
Ethernet LAN data rates	10, 100 Mbit/s
Frequency band	1.9 GHz
Lines quantity	20 lines
Phonebook capacity	1000 entries
AC adapter input voltage	100 - 240 V
Number of function keys	6
Display diagonal	2.4 \
Display resolution	240 x 320 pixels
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	- pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Base dimensions	130 x 100 x 25.1 mm
Handset dimensions (WxDxH)	175 x 53 x 20.3 mm