yeedi DVX46 - Operating and Programming; Preparation Before Cleaning

13
EN
2. Operating and Programming/2.1 Notes Before Cleaning
Tidy up the area to be cleaned by putting
furniture, such as chairs, in their proper place�
Make sure areas to be cleaned are well
illuminated so Mapping Sensor works
properly�
During the rst use, make sure each room door
is open to help Robot fully explore your house�
It may be necessary to place a physical
barrier at the edge of a drop to stop
the unit from falling over the edge�
Put away objects including wires,
cloths and slippers, etc� on the
oor to improve the cleaning
efciency.
Before using the product on a rug
with tasseled edges, please fold
the rug edges under�
Please do not stand in narrow
spaces, such as hallways, and
make sure not to block the
Detection Sensor�