yeedi Vac Hybrid DVX34 User Manual (English)

Questions and Answers:

S
Steven JacksonAug 2, 2025
Why is my yeedi Vac Hybrid DVX34 not charging?
- M
  Marc AndersonAug 2, 2025
  If your yeedi Vacuum Cleaner is not charging, here are several things to check: 1. Ensure the robot is switched ON. 2. Verify that the robot's Charging Contacts are properly connected to the Docking Station Pins. 3. Confirm that the Power Cord is firmly connected to the Docking Station. 4. If the battery is completely discharged, try to re-activate it by switching ON, placing the robot on the Docking Station by hand for 3 minutes, removing it, and repeating this process 3 times before charging normally. 5. Make sure the Docking Station is connected to the power supply.
T
Taylor RaymondAug 6, 2025
What to do if yeedi Vac Hybrid DVX34 cannot find dock?
- C
  Cory BondAug 6, 2025
  If your yeedi Vacuum Cleaner cannot return to the Docking Station, consider the following: * Ensure the Docking Station is correctly placed. * Check that the Docking Station is connected to power and has not been moved manually. * Make sure the robot is operating in a well-illuminated environment. * Avoid pausing the robot for more than 60 minutes. * Ensure the robot starts cleaning from the Docking Station.
D
Danielle GrayAug 11, 2025
Why does yeedi Vac Hybrid DVX34 Vacuum Cleaner reservoir keep falling?
- J
  Jessica EscobarAug 11, 2025
  If the reservoir drops out of place during cleaning with your yeedi Vacuum Cleaner, it is likely that the reservoir is not properly installed. Ensure the reservoir clicks into place during installation.
D
davidvargasAug 15, 2025
Why does yeedi Vacuum Cleaner return to dock early?
- O
  osbornkristieAug 15, 2025
  If your yeedi Vacuum Cleaner returns to the Docking Station before finishing cleaning, it could be due to several reasons: * The robot is working in a dark environment. Ensure the area is well-lit. * The battery is low, causing the robot to automatically switch to Return to Charger Mode. This is normal. * The working time varies based on the floor surface, room complexity, and selected Cleaning Mode. This is also normal. * The cleaning area may not be tidy. Remove small objects and tidy up before starting the robot.
T
Tanya ManningAug 20, 2025
Why does my yeedi Vacuum Cleaner get stuck?
- K
  Kevin MorrisAug 20, 2025
  If your yeedi Vacuum Cleaner gets stuck while working and stops, it's likely due to the robot becoming tangled with something on the floor, such as electrical wires, curtains, or carpet fringing. The robot will attempt to free itself. If it remains stuck, manually remove the obstacles and restart the robot.
C
campbellsuzanneAug 23, 2025
Why is yeedi Vac Hybrid DVX34 not dispensing water?
- D
  Douglas McclureAug 23, 2025
  If the water is not coming out of the Reservoir when your yeedi Vacuum Cleaner is mopping, check the following: * The water inlet filter on the bottom of the Reservoir might be clogged. Unscrew the water inlet and clean the filter. * The Reservoir may be out of water. Add water into the Reservoir. * The water outlets on the bottom of the Robot may be clogged. Check the water outlets and clean them.
T
Theresa MillerAug 27, 2025
Why is my yeedi Vac Hybrid DVX34 so loud?
- J
  Julie EspinozaAug 28, 2025
  If your yeedi Vacuum Cleaner makes much noise when cleaning, the brushes may be tangled, or the dust bin may be stuck. Clear the debris stuck regularly.

yeedi Vac Hybrid DVX34 Specifications

General

Model	yeedi Vac Hybrid DVX34
Category	Vacuum Cleaner
Suction Power	2500 Pa
Battery Capacity	5200 mAh
Run Time	200 minutes
Water Tank Capacity	300 ml
Navigation Type	Visual SLAM
App Control	Yes
Voice Control	Yes
Connectivity	Wi-Fi
Compatible Floor Types	Hardwood, Tile, Carpet
Dimensions	350 x 350 x 77 mm
Type	Robot Vacuum and Mop