yeedi M12 PRO + - Quick Start Guide; Installation; Station Assembly and Placement; Using Tanks

13 EN
QUICK START
1
Installation
Before using robot, please remove all protective materials�
The sound of Click indicates proper installation�
2
Assemble and Place the Station
Keep the area around the Station clear of objects especially objects with reective
surfaces�
 0.05m (0.16’)
 0.05m (0.16’)

0.8m (2.62’)
Note:
• If there are reective objects such as mirrors and reective skirting lines near the Station, the
bottom 14cm of that should be covered�
• Do not place the Station under direct sunlight�
• It is recommended to place the Station on the hard oor to experience complete functions of
the robot�
• Place Station in a location with a strong Wi-Fi signal�
Note:
* It is recommended to use YEEDI robot Cleaning Solution (sold separately)� Using other
cleaning solution may cause robot slipping, water tank block and other problems�
* The water drops in the Water Tank are left over from the function test, please rest assured to
use�
Use Tanks
Click
Click
Click