(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and
receiver.
Warnings
1.Check the voltage before using the product. Improper
voltage may damage the product and cause potential
safety hazards.
2. For indoor use only.
3. To prevent early product failure, the lightstrip should
only be installed in operating environment ranging
between: 10℉ to 104℉ (-10℃ to +40℃ ).
4. The lightstrip is not waterproof.
5. Regularly check the cable, the power supply and all
other parts .
6. Do not use this luminarie when any part is damaged.
6
To Next Page
Loading...
Need help?
General