To Next PageTo Next Page
Need help?Do you have a question about the yellow jacket TITAN and is the answer not in the manual?
General| Model | TITAN |
|---|---|
| Category | Test Equipment |
| Manufacturer | Yellow Jacket |
| Compatibility | R-22, R-134a, R-404A, R-407C, R-410A, R-507 |
| Refrigerant Compatibility | R-22, R-134a, R-404A, R-407C, R-410A, R-507 |
| Fitting Size | 1/4 inch |
| Working Pressure | 800 psi |
Emphasizes the need for trained technicians and outlines safety precautions for using the equipment.
Details EPA certification requirements and penalties for non-compliance with Section 608.
Explanation of symbols used in manifold gauge set diagrams for flow and valve status.
Steps for purging hoses before connecting them to the manifold.
Instructions for monitoring system pressures with the manifold.
Procedure for charging the vapor side of the system using Schrader valves.
Steps for charging the vapor side of the refrigeration system.
Detailed steps for creating a vacuum in the system.
Procedure for adjusting low-side pressure control and building pressure.
Instructions for safely removing the manifold set from the system without losing refrigerant or air.
List of parts and their corresponding numbers for the manifold gauge set.
Contact information including phone, fax, email, and website for Yellow Jacket Products.
