Need help?Do you have a question about the Yellowtec PUC2 and is the answer not in the manual?
General| Sample Rate | Up to 192 kHz |
|---|---|
| Bit Depth | 24-bit |
| Connectivity | USB 2.0 |
| AD/DA Conversion | 24-bit/192 kHz |
| Audio Inputs | 2 x XLR/TRS combo |
| Audio Outputs | 2 x XLR |
| Power Supply | USB bus-powered |
| Weight | 600 g (1.32 lbs) |
| Channels | 2 |
| Phantom Power | 48V |
Connect the PUC using the USB Y-Cord, ensure proper power supply, and install drivers if needed for high-res audio.
Description of the ZLM jack for direct signal routing and bypass of OS kernel for monitoring.
Detailed pin assignments for Digital Audio Input (S/PDIF, AES/EBU) and Output via D-Typ connector.
Describes LEA's unique technology for audio levelling, avoiding artefacts, and ensuring high-quality recordings.
Explains direct input monitoring, low latency (<5ms), and bypassing USB conversion for real-time audio.
Details on ZLM jack states (tip, ring, sleeve) and their effect on audio output mixing and levels.
Visual representation of the PUC's internal signal flow from inputs to outputs via USB and converters.
To Next Page
