How to reset YESKAMO IP Camera to default settings?
To reset your YESKAMO IP Camera to its default settings, press and hold the reset button for 5 seconds until you hear a “bu gu” sound and the red light starts to flash slowly.
What to do if YESKAMO IP Camera won't start after battery replacement?
If your YESKAMO IP Camera won't start after replacing the battery, check if the positive and negative poles of the battery are correctly aligned. Also, ensure that the battery is the recommended type.
Why am I unable to register an account for my YESKAMO IP Camera?
If you're unable to register an account for your YESKAMO IP Camera, make sure you select the correct country during registration. Also, you do not need to enter a verification code; follow the standard registration process.
General| Two-Way Audio | Yes |
|---|---|
| Weather Resistance | IP65 |
| PIR Detection | Yes |
| Motion Detection | Yes |
| Resolution | 1920x1080 (Full HD) |
| Wi-Fi Connectivity | 2.4GHz Wi-Fi |
| Storage | MicroSD card (up to 128GB) |
| Power Supply | DC 5V/1A |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
Technical specifications of the IP camera, covering image sensor, resolution, connectivity, and battery.
Instructions for downloading and installing the Cloudedge mobile application from app stores.
Step-by-step guide for creating a user account and logging into the Cloudedge app.
Process for connecting and adding the smart camera to the Cloudedge mobile application.
Information on the camera's PIR sensor and how it triggers motion detection alarms.
To Next Page
