YF ET-9EN - Function Setting Instructions

IV. Function setting instruction table:
(It is recommended that setup be performed by a technician)
ϡLong press the “Setting” key (5 seconds) to enter internal function settings. After
setting has been completed, press the “Setting” and “Save” keys to end the task and
exit.
ʳʳϡ
(P4, P5 are setting functions for ET-9H)
Item Function Default Value Remarks
P1
Define fructose output ratio: 1-2000 100

fructose output

fructose output
P2
Detect the fructose syrup viscosity
Recommended
to define as 5
Long press the “Setting”
key (5 seconds) under
P1 to enter P2
P3
Temperature adjustment
(password “1-2”“3-2”“2-2”)
15

temperature

temperature
P4
Refill delay time: 1-30 (stand for
0.1-3 seconds)
30
Press 
time (seconds)

(seconds)
P5
Refill time: 1-200 (x2 second) 180

time (seconds)

(seconds)
-3-