To Next PageTo Next Page
Need help?Do you have a question about the YIHUA 853AA and is the answer not in the manual?
General| Power Consumption | 600W |
|---|---|
| Temperature Stability | ±1°C |
| Display Type | Digital |
| Voltage | 220V |
| Temperature Range | 200°C - 480°C |
Instructions for placing and heating components on the preheating plate.
Operation guide for the hot air gun, including heating and airflow adjustment.
Operation guide for the soldering iron, including heating and temperature setting.
Steps for safely removing components from a PCB during rework.
Techniques for heating PCBs and components for effective rework.
How to calibrate temperature for precise control on the machine.
Instructions for switching between Celsius and Fahrenheit display modes.
Guide to switching the hot air gun between manual and automatic modes.
Step-by-step guide to replacing the hot air gun's heating element.
Instructions for replacing the soldering iron tip and heating core.
Guide for removing and replacing the preheating plate.
Features of the 853A model, including PID temperature control.
Features of the 853AA model, including ceramic heating core and upgraded fan.
How to calibrate temperature for precise control on the machine.
Instructions for switching between Celsius and Fahrenheit display modes.
Calibrating temperature for soldering iron and hot air gun based on environmental factors.
Guide to switching the hot air gun between manual and automatic modes for efficiency and safety.
Protection mechanism that stops heating if airflow is abnormally interrupted.
Introduction of soldering iron functionality with imported heating elements and anti-static design.
Steps for connecting and operating the preheating station.
Instructions for using the hot air gun for rework tasks.
Instructions for using the soldering iron for soldering tasks.
Detailed steps for removing components from PCBs during rework.
Importance of proper heating control to prevent PCB damage during rework.
How to calibrate temperature for precise control on the machine.
Guide to switching the hot air gun between manual and automatic modes.
Step-by-step guide to replacing the hot air gun's heating element.
