To Next PageTo Next Page
Need help?Do you have a question about the YILMAZ KD 402 and is the answer not in the manual?
The user's manual contains necessary information about the machine parts. Operators should read instructions carefully for safe and efficient use.
Contact nearest YILMAZ dealer or head office for technical problems. Machine serial number and year are on the technical label.
Explains safety symbols like ear protection, goggles, danger warnings, and important operation care. Crucial for operator safety.
Highlights employer's role in training staff, providing safety equipment, and ensuring operators understand the manual. Avoids unauthorized use.
Covers power cable handling, avoiding overload, proper illumination, keeping machine clean, and using correct materials for cutting.
Covers machine placement on an even surface, proximity to walls, connection tubes for dust collection, and balancing.
Requires electrical connection by a licensed electrician, using a grounded socket, and checking supply voltage matches machine label.
Includes degreasing the table, cleaning the machine from chips, checking cutting tools, and confirming saw rotation direction.
Details moving the unit, using the measuring system, activating the brake system, and clamping the workpiece before cutting.
Explains how to release the lock, adjust the saw head angle using a lever, and set specific angles with a spring or table lock shaft.
Describes selecting a single cutting unit, starting the motor, and performing cuts using double hand control for safety.
Instructions for resetting the measurement on the display by pressing F and SET buttons, and adjusting the measurement bolt.
Covers disconnecting power, cleaning surfaces from chips, avoiding dye-damaging materials, and checking cutting tools for damage.
Detailed steps for removing and installing saw blades, including dismantling guards, bolts, and ensuring correct rotation direction.
Instructions for changing the belt, including disconnecting power, removing screws, loosening bolts, and adjusting belt tension.
General| Model | KD 402 |
|---|---|
| Category | Saw |
| Blade Diameter | 400 mm |
| Motor Power | 2.2 kW |
| Rotation Speed | 2800 rpm |
