Daily Maintenance
In order to ensure a maximum performance of the vacuum, it is strongly
recommended to maintain it components regularly.
1. Turn off the vacuum before cleaning.
2. Wipe the surface with a clean cloth.
3. Be cautious not to get water into the inner part of the main motor.
*
Do not place the vacuum cleaner under direct sunlight or in wet place after
cleaning.
There will be alert on LED Display if the roller brush gets tangled or stuck.
Please clean it in time.
1. Unlock the side lock on the bottom side of the cleaner head.
2. Remove the side cover and take out the roller brush.
3. Use the 2-in-1 cleaning gadget to clean it.
Clean Detachable Roller Brush:
Clean Non-electricity Part of the Main Motor:
Charging
Storage
The battery could be charged only when connected to the main motor. And it is
suggested not to disassemble the battery from the main motor regularly.
Notes:
* The machine cannot be turned on during charging.
* Charge the machine only with the adapter provided by YISORA.
EN - 09 EN - 10
* It will take about 5 hours to fully charge the battery.
To Next Page
Loading...
