YOKOGAWA Daqstation DX2020

2-24
IM 04L42B01-01E
2.12 UsingtheUSBFlashMemory(/USB1Option)
Connecting/RemovingaUSBFlashMemory
• ConnectingaUSBFlashMemory
If you are using the multi batch function (/BT2 option), see the DX1000/DX1000N/
DX2000 Multi Batch (/BT2) User’s Manual, IM04L41B01-03E.
1.
Connect a USB flash memory to the USB port on the DX.
2.
In operation mode, possible operations are shown. Select the desired operation
using the arrowkeys and press DISP/ENTER.
When set to auto save
When set to manual save