IM 12B07K02-01E
<INTRODUCTION>
i
INTRODUCTION
This user’s manual provides information for the installation and use of the FU20 pH/ORP sensor.
The FU20 is the choice for the majority of typical waste water and process applications.
Upon delivery, unpack the sensor carefully and inspect it to ensure it was not damaged during
shipment. If damage is found, retain the original packing materials (including outer box) and then
immediately notify the carrier and the relevant Yokogawa sales oce. Make sure the Model Code
on the sensor is the same as on the packing list. For details of the Model Code, refer to Sec. 1.2.
Other related items are described in the following manuals.
Model Title IM No.
FLXA202, FLXA21 2-Wire Liquid Analyzer IM 12A01A02-01E
FLXA402 4-Wire Converter IM 12A01F01-02EN
IM 12A01F02-01EN etc.
PH450G 4-wire pH/ORP Converter IM 12B07C05-01E
Media No. IM 12B07K02-01E 4th Edition : Nov. 2018 (YK)
All Rights Reserved Copyright © 2000, Yokogawa Electric Corporation
4th Edition : Nov.20,2018-00
To Next Page
Loading...
Need help?
General
