2.HardwareSpecications
2-10
TI 30A10A30-01E
SFPport
SFP port has a plug-in slot for an SFP module.
Plug the SFP module into the slot to use Vnet/IP optical connection. The SFP port is for dual
purpose (RJ45/SFP) combo port.
The combo port will select SFP interface automatically when the SFP module is installed.
Port status LED
Each port has 2-port status LEDs.
The LED on the left indicates link status. It glows in green during linkup.
The LED on the right indicates data access. It flashes in orange while receiving/sending data.
Dec. 26, 2016-00
To Next Page
Loading...
Need help?
General
