YOKOGAWA ISC40FF - Isc40 Ff Flow Fitting; General Specifications; Materials; Operating Range

6
IM 12D07K04-01EN-P
2. ISC40FF FLOW FITTING
2.1 General Specications
2.1.1 Materials
Wetted parts sensor
Model ISC40FF-S : AISI 316 SS; Viton
Model ISC40FF-P
(1)
: Polypropylene; Viton
Model ISC40FF-F
(1)
: PVDF (Kynar); Viton
Non-wetted parts sensor : AISI 304 SS or AISI 316 SS
2.1.2 Operating range
Temperature
Model ISC40FF-S : Max. 150°C (302°F)
Model ISC40FF-P
(1)
: Max. 100°C (212°F)
Model ISC40FF-F
(1)
: Max. 130°C (266°F)
Pressure
Model ISC40FF-S : Max. 10 bar (150 PSI) at operating temperature
Model ISC40FF-P
(1)
: Max. 6 bar (90 PSI) at 20°C (68°F)
Max. 1 bar (15 PSI) at 100°C (212°F)
Model ISC40FF-F
(1)
: Max. 10 bar (150 PSI) at 20°C (68°F)
Max. 1 bar (15 PSI) at 130°C (266°F)
2.1.3 Shipping details (Without options)
Package size (LxWxH) : 250 x 150 x 140 mm (9.84 x 5.90 x 5.51 inch)
Package weight (max) : 1.5 kg (3.3 lbs)
2.1.4 Process connections
1/2” NPT in ow tting, connected with optional ange adapters to the actual instal-
lation.
Note
(1)
: The ISC40 sensor type -GG and -TG are supplied with a Viton gasket. This
gasket may be used with the older series of ISC40FF ttings. It should be discarded
when the sensor is mounted in combination with the ISC40FF type -PA and -FA.