YOKOGAWA ProSafe-RS Technical Information

ii
TI 32S01J30-01E
Apr. 2013/8th Edition
General Clerical error correction
1.1 Type “n” standard number was changed.
Descriptions of NI standard were revised.
1.2 Descriptions and gures were revised for change of Type “n” standards.
1.3 Descriptions and gures were revised for change of Type “n” standards.
2.1 Descriptions of NI standard were revised.
2.2 Type “n” standard number was change.
Descriptions and gures were revised for chagne of Type “n” standards.
Appendix 1. AEP7D-0, AEPV7D-0 and AEPV7D-0 were deleted.
Appendix 2. Su󰀩x codes for explosion protection were changed.
Parameters of Type “n” were deleted.
AEP7D-40, AEPV7D-40 and AEPV7D-40 were deleted.
STK4A-00 and STD4A-00 were deleted.
Sep. 2013/9th Edition
General Clerical error correction
Appendix 1. Su󰀩x codes for explosion protection were changed.
SSC57 was added.
Appendix 2. SSC57 was added.
Dec. 2013/10th Edition
Appendix 1. Su󰀩x codes for explosion protection were changed.
Oct. 2014/11th Edition
Safety Precautions
[“Protective grounding terminal” was changed to “Protective conductor terminal”
(Based on IEC 61010-1)]
1.1 “Table Explosion Protection Standards that ProSafe-RS Complies”
[Revised descriptive texts]
2.1 Non-Incendive approved types and standards
[Revised descriptive texts]
2.2 Type “n” complied standards
[Revised descriptive texts]
Appendix 1. “Table NI Approved Products”
[SNT421-E3, SNT421-E3/CU1N, SNT421-E3/CU1T, and SNT521-E3 are added]
“Table Parameters (The Source Devices)”
[SNT421 and SNT521 are added]
“Table Parameters (The Load Devices)”
[SNT421 and SNT521 are added]
Appendix 2. “Table the List of Type “n” Compliant Products”
[SNT421-E3, SNT421-E3/CU1N, SNT421-E3/CU1T, and SNT521-E3 are added]
Feb. 2015/12th Edition
Safety Precautions
Precautions were added.
Appendix 1. ALR121-SE3 and ALE111-SE3 were added.
Appendix 2. ALR121-SE3 and ALE111-SE3 were added.
Aug. 2015/13th Edition
General Clerical error correction
1.1 ATEX Type “n” standard number was revised.
2.2 ATEX Type “n” standard number was revised. Note was added.
Appendix 2. ATEX was added in front of Type “n”.
Nov. 2015/14th Edition
1.1 Type “i” of “Table Explosion Protection Standards that ProSafe-RS Complies” was added.
1.3 “Overview of Connecting N-IO Components” was added.
2.2 S2BN5D of ATEX Type “n” was added.
IECEx Type “n” was added.
3 “3. Intrinsic Safety Explosion Protection Instrumentation” was added.
Nov. 27, 2015-00

YOKOGAWA ProSafe-RS Specifications

General

Brand	YOKOGAWA
Model	ProSafe-RS
Category	Industrial Equipment
Language	English