YOKOGAWA ProSafe-RS Technical Information

v
TI 32S01J30-01E
Appendix 2.1 N-IO eld enclosure was added.
Appendix 2.2 N-IO eld enclosure was added.
Appendix 4 “US (FM) NI/Canada (FM) NI Control Drawing for ProSafe-RS N-IO” is revised.
May 2021/27th Edition
1.1 US (FM) standard number was revised.
Canada (FM) standard number was revised.
ATEX Type “n” standard number was revised.
ATEX Type “n” (S2BN5D) standard number was revised.
IECEx Type “n” standard number was revised.
ECAS-Ex Type “n” standard number was revised.
ATEX Type “i” (S2BN5D) standard number was revised.
2.1 US (FM) standard number was revised.
Canada (FM) standard number was revised.
2.2 ATEX Type “n” standard number was revised.
ATEX Type “n” (S2BN5D) standard number was revised.
IECEx Type “n” standard number was revised.
ECAS-Ex Type “n” standard number was revised.
The URL to download the latest IM was added to the “Complied Standards”
3.1 ATEX Type “i” (S2BN5D) standard number was revised.
Appendix 1 SCB100 and SCB110 were added.
Appendix2 SCB100 and SCB110 were added. A2BM4 was added.
Appendix4 Control Drawing was replaced to new revision.
The note about AIP602 was added.
Appendix5 Control Drawing was replaced to new revision.
The note about AIP602 was added.
Dec. 2021/28th Edition
“ProSafe-RS Lite” is newly added.
Introduction “Tightening Torque of Screws”was added.
1 to 3 Revise for Addition of Ex “ec” and UKEX.
1.3 Notices that SCB100/SCB110 shall not be installed in Division 1 or Zone 1 hazardous area are
added.
Appendix 1 Conguration was changed.
Appendix 2 Conguration was changed.
Appendix 3 Conguration was changed.
Appendix 4,5,6 Removed due to revised conguration of Appendix.
Apr. 2022/29th Edition
CONTENTS Appendix 1.2 was added.
Appendix 2.1, Appendix 2.2, Appendix 2.5, Appendix 3, Appendix 3.2 was revised
1.1 Table Explosion Protection Standards that ProSafe-RS/ProSafe-RS Lite Complies was revised
2.2 Ex “ec”,Type “n” Listed reference table were revised.
3.1.1 Explosion-proof Specications and Complied Standard number was revised.
3.1.2 Intrinsic Safety Explosion Protection of IEC Standard number was revised.
3.1.5 Intrinsic Safety Explosion Protection of EAC Ex was added.
Appendix 2.2 Replaced instruction data with Rev10.
Appendix 2.5 Applicable Standerds number and Markings number were revaised.
Appendix 3 Signicantly revised.
June 2022/30th Edition
1.1 KCs Ex “ec”, CCC-Ex/NEPSI Type “n” are added.
2.2 KCs Ex “ec”, CCC-Ex/NEPSI Type “n” are added.
Nov. 2022/31st Edition
1.1 Table Explosion Protection Standards that ProSafe-RS/ProSafe-RS Lite Complies was revised.
1.3 UKEX are added.
2.2 UKEX Ex “ec”, UKEX Type “n” Listed reference table were revised.
3.1.1 UKEX are added.
Appendix 2.5 UKEX Ex “ec” and standard number are added.
Nov. 10, 2022-00

YOKOGAWA ProSafe-RS Specifications

General

Brand	YOKOGAWA
Model	ProSafe-RS
Category	Industrial Equipment
Language	English