EasyManuals Logo
Home>Yokomo>Controller>X Series

Yokomo X Series User Manual

Yokomo X Series
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
9.Programmable items
You can set detailed setting parameters and check racing information & present data using the program card or WiFi
module decide. If motor is not connected, the program card is not connected. It can be connected using the front
3pin connector, and please refer to the manuals on the program card and WiFi module decide for further details.
Programmable Items Parameter Values Default
1 Select Battery LiPo / LiFe / NiMh(NiCd) LiPo
2 Cut Off Voltage Disable / Auto / 3.0V ~ 7.5V(Step:0.1V) Auto
3 Power Curve 0 ~ 10 5
4 Boost Mode
Boost Max + TB
Off X X
ON 0 ~ 58 0 ~ 58
+TH 0 ~ 58 0 ~ 58
+ATH 0 ~ 58 0 ~ 58
Off
5 Boost-TH. Limit
TH Limit
10,20,30,40,50,60,70,80,90,100 0~58
0
6 Boost Min-rpm 0~64500(Step: 500rpm) 5000rpm
7 Boost Max-rpm 500~65000(Step: 500rpm) 25000rpm
8
Turbo Delay
0.0~ 1.00s (step: 0.05s) 0.20s
9 Turbo + Slope 0.0~ 1.00s (step: 0.05s) 0.20s
10 Turbo - Slope 0.0~ 1.00s (step: 0.05s) 0.20s
11 Acceleration 0~10 5
12 Start Power 0~100(step: 1%) 0%
13 Smooth Start Rate 0~30(step: 1) 0
14 Smooth Start Range 0~75%(step: 1%) 0%
15 Voltage Limit Off, 7.4V ~ 8.7V(step: 0.1V) Off
16 Reverse Function One Way / Two Way / Two Way2 / Two Way3 Two Way
17 Reverse Delay Off / 0.2s / 0.5s / 0.8s / 1.3s / 1.8s / 2.5s 2.5s
18 M- Reverse Amount 20% ~ 100%(step: 1%) 100%
19 Neutral Width Narrow / Normal / Wide Normal
20 Motor Direction Normal / Reverse Normal
21 Brake Response 0% ~ 100%(step: 1%) 0%
22 FAN Control Auto, On Auto
23 Drag Brake 0% ~ 100%(step: 1%) 0%
24 Min Brake Amount 0% ~ 100%(step: 1%) 30%
25 Mid Brake Amount 0% ~ 100%(step: 1%) 50%
26 Mid Brake Location 0% ~ 100%(step: 1%) 50%
27 Max Brake Amount 0% ~ 100%(step: 1%) 100%
28 Soft Brake Hard / Soft Soft
29
Brake Freq
1KHz ~ 16KHz(step: 1KHz) / 32Khz 1Khz
30 Motor Freq 1KHz ~ 16KHz(step: 1KHz) / 32Khz 5Khz
31 Drag Freq 1KHz ~ 16KHz(step: 1KHz) / 32Khz 1Khz
32 Cut Off Temp 100° ~ 135°(step: 5) / Disable 135°
33 Cut Off M-Temp 100° ~ 135°(step: 5) / Disable 135°
34 B.E.C Voltage 6.0V / 7.4V 6.0V
35 Gear Ratio 2.0 : 1 ~ 15.0 : 1 2.0 : 1
36 Tire Diameter 40mm ~ 200mm 63mm
37 Motor-Wiring A-B-C / C-B-A A-B-C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yokomo X Series and is the answer not in the manual?

Yokomo X Series Specifications

General IconGeneral
BrandYokomo
ModelX Series
CategoryController
LanguageEnglish