Yokota WU-1 - Output Data Destination

76-QD7913EN-00Y00-03.doc
27
7.2.3.3. OUTPUT DISTINATION
RUNDOWN DATA
Set contents
Selection
Default
Setting ON/OFF of SERIAL and LAN output of rundown data per piece.
OFF
ON
SERIAL：ON
LAN：OFF
WAVE DATA
Set contents
Selection
Default
Setting ON/OFF of serial output of wave data.
ON: Wave data is outputted from the wireless unit to external device.
OFF: Wave data is not outputted from the wireless unit to external device.
* Before setting to ON, make sure that “WAVE DATA OUTPUT” is ON (see Cl.
7.1.1.1).
OFF
ON
SERIAL：OFF
ID NO. PRINT
Set contents
Selection
Default
Setting ON/OFF of LAN output of ID number.
ON: ID number is printed.
OFF: ID number is not printed.
OFF
ON
LAN：OFF