Yokota WU-1 - Rundown Print Format Options

76-QD7913EN-00Y00-03.doc
28
7.2.3.4. RUNDOWN PRINT FORMAT
TOOL NUM PRINT
Set contents
Selection
Default
Setting ON/OFF of printing of tool number for rundown.
ON: Tool number is printed.
OFF: Tool number is not printed.
OFF
ON
ON
REMAIN PRINT
Set contents
Selection
Default
Setting ON/OFF of remain print for rundown results.
ON: Remaining quantity is printed.
OFF: Remaining quantity is not printed.
OFF
ON
ON
PLUS PRINT
Set contents
Selection
Default
Setting ON/OFF of pulse print for rundown results.
ON: Tightening pulse is printed.
OFF: Tightening pulse is not printed.
OFF
ON
ON
DATE PRINT
Set contents
Selection
Default
Setting ON/OFF of date print for rundown results.
ON: Date is printed.
OFF: Date is not printed.
OFF
ON
ON
FIXED PRINT
Set contents
Selection
Default
Setting fixed length/variable length for printing of rundown results.
ON: Printing in fixed length.
OFF: Printing in variable length.
OFF
ON
ON