Need help?Do you have a question about the Yolin YL90T-H and is the answer not in the manual?
General| Brand | Yolin |
|---|---|
| Model | YL90T-H |
| Category | Bicycle Accessories |
| Language | English |
Details the physical dimensions and visual aspects of the YL90T display unit, including front and side views.
Lists features of the YL90T display, including indicators, customizable options, and recovery functions.
Illustrates the YL90T display layout, identifying key functional areas and their indicators.
Defines the functions of the five buttons on the YL90T display's operating unit for user interaction.
Explains how to turn the YL90T display on and off, noting low leakage current and auto-shutoff.
Details how to cycle through display modes: Odometer, Trip Odometer, Max Speed, and Average Speed.
Describes the walk boost mode, its activation, fixed 6 km/h speed, and how to exit.
Explains using a button to control display lights and adjust backlight brightness.
Details adjusting the Pedal Assist System (PAS) level using +/- buttons to change motor output power.
Illustrates the 5-bar battery indicator and explains low battery flashing warnings.
Explains error code display for system faults and refers to Schedule 1 for definitions.
Explains setting the display for metric or imperial units (P1).
Details setting the display's rated voltage (P2) from available options: 24V, 36V, 48V, 52V.
Covers setting Pedal Assist System (PAS) levels (P3), listing available ranges.
Explains adjusting each PAS level's speed by setting the PAS level ratio value.
Details setting wheel diameter (P4) for accurate speed/distance, range 8-50 inches.
Explains setting the number of speed sensor magnets (P5) for accurate speed measurement.
Covers setting the maximum speed limit (P6) for the electric bicycle, with adjustable ranges.
Details setting the controller's current limit (P7) to manage power output and protect components.
Covers settings related to the Pedal Assist Sensor (PAS) configuration.
Explains setting the direction of the PAS sensor: run-F (front) or run-b (opposite).
Details adjusting PAS sensor sensitivity (SCN) from level 2 (highest) to 9 (lowest).
Covers setting the number of magnets for the pedal assist sensor (PAS), range 5-31.
Covers various throttle-related settings for controlling speed and functionality.
Explains enabling (HL-Y) or disabling (HL-N) walk boost at 6 km/h when using throttle.
Details setting throttle level (HF-Y/HF-N) to control max speed or disable throttle level dependency.
Covers activating and setting a four-digit power-on password, including default settings.
Explains setting auto sleep time (Pb) to turn off the display after inactivity, saving battery.
Details the procedure to restore the display to its original factory default parameter settings.
Explains how to manually reset the trip odometer; the main odometer cannot be reset.
Provides details on Yolin's limited warranty for product defects, valid for 12 months.
Lists conditions and damages not covered by the Yolin warranty, such as tampering or external damage.
Details wire color coding and sequence for connecting the display to the controller and components.
Offers advice on handling, operation, and parameter settings for proper function and safety.
To Next Page
