To Next PageTo Next Page
Need help?Do you have a question about the Yolin YL80C and is the answer not in the manual?
General| Brand | Yolin |
|---|---|
| Model | YL80C |
| Category | Bicycle Accessories |
| Language | English |
Details the electrical and operational parameters of the intelligent LCD meter for electric bicycles.
Provides visual information and physical measurements of the bicycle's LCD meter.
Outlines the various functions provided by the YL80C meter to meet riding needs.
Illustrates the interface layout and distribution of functional areas on the YL80C meter.
Explains the function of each of the five keys on the YL80C meter's operation unit.
Covers basic operations like turning the meter on/off and navigating the user interface (UI).
Describes how to engage and use the electric walk power assistance mode for pushing the bike.
Details how to turn the display backlight and headlights on or off using the headlight key.
Explains how to switch between Power Assistance System (PAS) levels to adjust motor output.
Describes the battery level display and motor power indication on the meter interface.
Explains how error codes are displayed and the necessary actions to take when faults occur.
Covers resetting single trip mileage and converting between imperial and metric units.
Explains how to adjust the display's backlight brightness levels (1-3).
Sets the wheel diameter for accurate speed and mileage display, with options 8-26, 700C, 28-30.
Configures the maximum riding speed (12-40 Km/h) to ensure rider safety.
Enables user customization of various system parameters like PAS, battery, and passwords.
Allows inputting voltage values (1-5) to define the battery level display.
Configures PAS levels and assist ratio values to tune motor output for different riding needs.
Sets the maximum current limit for the controller, ranging from 7.0A to 25.0A.
Covers direction and sensitivity settings for the booster sensor.
Sets the number of magnetic heads on the wheel for the speed sensor (1-15).
Configures throttle behavior, including turn-assisted pushing and gear enable settings.
Includes settings for battery delay time, button push enable, and slow start.
Enables and modifies the four-digit password required to turn on the display.
Confirms input to save current settings or exits without saving.
Resets all parameters to factory default values, requiring confirmation.
Details the limited warranty policy and conditions not covered by the warranty.
Illustrates the standard connector cable sequence for connecting the meter to the controller.
Advises on safe practices, such as avoiding plugging/unplugging while powered on and handling bumps.
Lists error codes and their corresponding definitions for troubleshooting.
Provides default percentage values for different PAS levels (0-3, 1-3, etc.).
