17
Find the controller(Master) garage door sensor 2.
Hold the set button for 10-15 seconds, the light
will flash red quickly.
The above two devices will unpair by themselves
and the light stops flashing.
Find the responder(Receiver) action device.
Hold the set button for 10-15 seconds, the
device will enter unpairing mode.
When the garage door sensor 2 is detected to
be opened, the responder will no longer turn on.
Unpairing
Responder List
YS6602-UC YoLink Plug
YS6604-UC YoLink Plug Mini
YS5705-UC In-wall Switch
YS6801-UC Smart Power Strip
Continuously ..updating
YS6802-UC Smart Switch
YS6704-UC In-wall Outlet
SET BUTTON
SET
To Next Page
Loading...