Yolink Garage Door Sensor 2 User Manual

YoLink Control
YoLink Control is our unique “device to device” control technology. Under YoLink Control,
the devices can be controlled without internet or Hub.
You will need to set it up physically.
Devices which send out command is called controller(Master). Devices which receive
command and act accordingly is called responder(Receiver).
Find a garage door sensor 2 as controller(Master).
Hold the set button for 5-10 seconds, the light
will flash green quickly.
After pairing is done, the light will stop flashing.
Find an action device as responder(Receiver).
Hold the set button for 5-10 seconds, the device
will enter pairing mode.
Whe n the doo r is detected to be opene d, the
res pond er w ill be turned o n as well.
Pairing
16
SET BUTTON
SET

Yolink Garage Door Sensor 2 Specifications

General

Brand	Yolink
Model	Garage Door Sensor 2
Category	Garage Door Opener
Language	English