METHOD NO. 1:
METHOD NO. 2:
METHOD NO. 3:
5
Press P2 programming button
on remote control A.
Remote control
has been programmed.
Remote control
has been programmed.
The motor will make a sound.
The blind will make short
up/down moves.
The motor will make
a sound. The blind
will make short
up/down moves.
The blind will make two short
up/down moves. The motor
will make a few short sound
signals.
Press P2
programming
button on remote
control A.
Press and hold
STOP button
on remote
control B for
2 seconds.
The motor will make a sound.
The blind will make short
up/down moves.
The blind will make two short
up/down moves. The motor
will make a few short sound
signals.
Press and hold
STOP button
for 2 seconds on
the remote control
that is being
programmed.
10. Deleting the next transmitter
The motor will make
a sound. The blind
will make short
up/down moves.
The motor will make
a sound. The blind will
make short
up/down moves.
The blind will make two short
up/down moves. The motor
will make a few short sound
signals.
Press P2
programming button
on remote control A.
Press P2
programming
button on remote
control B.
Press P2 programming button
on remote control A.
Remote control
has been deleted.
METHOD NO. 2:
METHOD NO. 3:
Press P2 programming
button on remote control A.
Remote control
has been deleted.
Remote control
has been deleted.
The motor will make
a sound. The blind
will make short
up/down moves.
The motor will make
a sound. The blind will
make short
up/down moves.
The blind will make two short
up/down moves. The motor
will make a few short sound
signals.
Press P2
programming button
on remote control A.
Press and hold
STOP button on
remote control
B for 2 seconds.
The motor will
make a sound. The blind will
make short up/down moves.
Turn on power supply. The blind will
make two short up/down
moves. The motor will
make a few short
sound signals.
Press and hold
STOP button on the
programmed remote
control for 2 seconds.
Turn on power supply.
To Next Page
Loading...
Need help?
General
