York AHE30B - User Manual

TECHNICAL GUIDE
SINGLE PIECE STANDARD ECM
AIR HANDLERS
FOR USE WITH SPLIT-SYSTEM
COOLING & HEAT PUMPS
MODELS: AHE18 THRU 60*
Due to continuous product improvement,
specifications are subject to change without notice.
Visit us on the web at:
www.upgnet.com and www.york.com
Additional rating information can be found at:
www.ahridirectory.org
WARRANTY
Standard 5-year limited parts warranty.
Extended 10-year limited parts warranty when product is
registered online within 90 days of purchase for replace-
ment or closing for new home construction.
ISO 9001
Certified Quality
Management System
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
697887-YTG-H-0514
DESCRIPTION
The AHE Air Handler line offers the ultimate in comfort, sound
and application flexibility. This unit may be used for upflow, down-
flow, horizontal right, or horizontal left applications.
No special kits are
required to install this deluxe product.
All JCI Unitary Products air handlers and coils use a TXV to pro-
vide our customers with the optimum performance and refriger-
ant control. Air handlers are shipped with “Flex-coils” without a
factory installed metering device. For added flexibility, an R-22
or R-410A TXV or orifice can be field installed to meet your
refrigerant choice.
FEATURE
Thermal Expansion Valve - Provides the ultimate refrigerant
control required for today’s high efficient product. The UPG bolt-
on TXV provides easy installation to convert the air handler to
the required refrigerant, which is a true bolt-on design that does
not require brazing to replace or install.
Insulated Cabinet - All air handler cabinets are thermally insu-
lated with 3/4” foil faced insulation to prevent sweating.
Factory Sealed - Achieves 2% or less total airflow leakage rate
at duct blaster field test conditions for system airflow verifica-
tion.
Durable Finish Inside and Out - Air handler casings are made
of pre-painted galvanized steel which provides a better paint to
steel bond that resists corrosion and rust creep. All internal coil
sheet metal parts are made of G60 galvanized or prepainted
G30 galvanized.
Filters - All models have internal filter racks provided for use
with 1” thick standard size filters.
Electric Heat Kits - 6HK series of field installed electric heat
kits are available for installation friendly and easy service appli-
cations.
High Efficiency Blowers - All models use high efficiency
brushless DC motors to provide cooling SEER rating enhance-
ment.

Summary

Technical Guide Overview

Key Features

Highlights crucial features like Thermal Expansion Valve, insulated cabinet, factory sealed design, durable finish, filters, electric heat kits, and high efficiency blowers.

Dimensions and Duct Connection Data

Physical Dimensions

Provides physical dimensions, duct connection data, and wiring knockout information for various air handler models.

Coil Technical Data

Details coil specifications including application, refrigerant connection types, face area, rows deep, fin type, and coil size.

Cooling Capacity Data

Cooling Capacity Data (Continued)

Electric Heat Performance Data

Electric Heat Performance (208;230-1-60 & 208;230-3-60)

Details kW and MBH performance, along with kW staging, for electric heat kits across voltage configurations.

Electrical Data for Single Source Power Supply (208;230-1-60)

Electrical Data for Single Source Power Supply (208;230-1-60) Continued

Electrical Data for Multi-Source Power Supply (208;230-1-60)

Electrical Data for Single Source Power Supply (208;230-3-60)

Electrical Data for Multi-Source Power Supply (208;230-3-60)

York AHE30B Specifications

General

Phase	1
Hertz	60 Hz
Refrigerant	R-410A
Voltage	208/230V
Power Supply	208/230V, 1 Phase, 60 Hz
Cooling Capacity	30000 BTU/h