York AHE60D3XH21 - User Manual

TECHNICAL GUIDE
SINGLE PIECE STANDARD ECM
AIR HANDLERS
FOR USE WITH SPLIT-SYSTEM
COOLING & HEAT PUMPS
MODELS: AHE18 THRU 60*
Due to continuous product improvement,
specifications are subject to change without notice.
Visit us on the web at:
www.upgnet.com and www.york.com
Additional rating information can be found at:
www.ahridirectory.org
WARRANTY
Standard 5-year limited parts warranty.
Extended 10-year limited parts warranty when product is
registered online within 90 days of purchase for replace-
ment or closing for new home construction.
ISO 9001
Certified Quality
Management System
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
697887-YTG-H-0514
DESCRIPTION
The AHE Air Handler line offers the ultimate in comfort, sound
and application flexibility. This unit may be used for upflow, down-
flow, horizontal right, or horizontal left applications.
No special kits are
required to install this deluxe product.
All JCI Unitary Products air handlers and coils use a TXV to pro-
vide our customers with the optimum performance and refriger-
ant control. Air handlers are shipped with “Flex-coils” without a
factory installed metering device. For added flexibility, an R-22
or R-410A TXV or orifice can be field installed to meet your
refrigerant choice.
FEATURE
Thermal Expansion Valve - Provides the ultimate refrigerant
control required for today’s high efficient product. The UPG bolt-
on TXV provides easy installation to convert the air handler to
the required refrigerant, which is a true bolt-on design that does
not require brazing to replace or install.
Insulated Cabinet - All air handler cabinets are thermally insu-
lated with 3/4” foil faced insulation to prevent sweating.
Factory Sealed - Achieves 2% or less total airflow leakage rate
at duct blaster field test conditions for system airflow verifica-
tion.
Durable Finish Inside and Out - Air handler casings are made
of pre-painted galvanized steel which provides a better paint to
steel bond that resists corrosion and rust creep. All internal coil
sheet metal parts are made of G60 galvanized or prepainted
G30 galvanized.
Filters - All models have internal filter racks provided for use
with 1” thick standard size filters.
Electric Heat Kits - 6HK series of field installed electric heat
kits are available for installation friendly and easy service appli-
cations.
High Efficiency Blowers - All models use high efficiency
brushless DC motors to provide cooling SEER rating enhance-
ment.

Summary

YORK Air Handler Product Overview

Key Features

Highlights thermal expansion valve, insulated cabinet, factory sealed, durable finish, filters, electric heat kits, and high efficiency blowers.

Cooling Capacity Performance

Capacity Ratings Table

Presents cooling capacity (MBH) at various evaporator temperatures and R-410A pressures.

Application Factors and Electrical Data

Physical and Electrical Data

Details blower, motor, filter, and shipping data, plus electrical requirements for cooling only.

Electrical Heat Data

Lists heater kit models and corresponding minimum fan speed requirements for safe operation.

Electric Heat Performance and Wiring

Electric Heat Performance Data

Presents electric heat performance data (kW, MBH, kW staging) for various heater models.

Single Source Electrical Wiring

Provides electrical data for single source power supply, including circuit ampacity and wire size.

Installation Limitations and Airflow

Air Flow Data Table

Presents airflow (CFM) at various external static pressures and blower motor speeds.

Thermostat Connection Diagrams

Heat Pump Thermostat Wiring

2-Stage Heat Pump with ECM Motor

York AHE60D3XH21 Specifications

General

Brand	York
Model	AHE60D3XH21
Category	Air Conditioner
Language	English