York AHE30B3XH21 - User Manual

TECHNICAL GUIDE
SINGLE PIECE STANDARD ECM
AIR HANDLERS
FOR USE WITH SPLIT-SYSTEM
COOLING & HEAT PUMPS
MODELS: AHE18 THRU 60*
Due to continuous product improvement,
specifications are subject to change without notice.
Visit us on the web at:
www.upgnet.com and www.york.com
Additional rating information can be found at:
www.ahridirectory.org
WARRANTY
Standard 5-year limited parts warranty.
Extended 10-year limited parts warranty when product is
registered online within 90 days of purchase for replace-
ment or closing for new home construction.
ISO 9001
Certified Quality
Management System
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
697887-YTG-H-0514
DESCRIPTION
The AHE Air Handler line offers the ultimate in comfort, sound
and application flexibility. This unit may be used for upflow, down-
flow, horizontal right, or horizontal left applications.
No special kits are
required to install this deluxe product.
All JCI Unitary Products air handlers and coils use a TXV to pro-
vide our customers with the optimum performance and refriger-
ant control. Air handlers are shipped with “Flex-coils” without a
factory installed metering device. For added flexibility, an R-22
or R-410A TXV or orifice can be field installed to meet your
refrigerant choice.
FEATURE
Thermal Expansion Valve - Provides the ultimate refrigerant
control required for today’s high efficient product. The UPG bolt-
on TXV provides easy installation to convert the air handler to
the required refrigerant, which is a true bolt-on design that does
not require brazing to replace or install.
Insulated Cabinet - All air handler cabinets are thermally insu-
lated with 3/4” foil faced insulation to prevent sweating.
Factory Sealed - Achieves 2% or less total airflow leakage rate
at duct blaster field test conditions for system airflow verifica-
tion.
Durable Finish Inside and Out - Air handler casings are made
of pre-painted galvanized steel which provides a better paint to
steel bond that resists corrosion and rust creep. All internal coil
sheet metal parts are made of G60 galvanized or prepainted
G30 galvanized.
Filters - All models have internal filter racks provided for use
with 1” thick standard size filters.
Electric Heat Kits - 6HK series of field installed electric heat
kits are available for installation friendly and easy service appli-
cations.
High Efficiency Blowers - All models use high efficiency
brushless DC motors to provide cooling SEER rating enhance-
ment.

Summary

Product Description and Features

Key Product Features

Highlights features like TXV, insulated cabinets, factory sealing, durable finish, filters, heat kits, and efficient blowers.

Physical and Coil Specifications

Cooling Capacity Data

Cooling Capacity Tables

Presents cooling capacity data (MBH) for various operating conditions and models.

Electrical Performance and Data

Electric Heat Performance Data

Details electric heat performance, including nominal kW and total heat (kW/MBH) for various staging.

Electrical Data for Single Source Power Supply

Limitations and Air Flow

Air Flow Data

Provides air flow (CFM) data at various external static pressures for different blower speeds.

Wiring and Thermostat Connections

Typical Thermostat Connection Diagrams

Illustrates typical thermostat wiring for cooling only, heat pump, and electric heat configurations.

Electric Heat Kit Wiring

Advanced Wiring Diagrams

Thermostat Wiring for 2-Stage Heat Pump with ECM Blower

York AHE30B3XH21 Specifications

General

EER	11.5
HSPF	9.0
Voltage	208/230 V
Phase	1
Hertz	60 Hz
Energy Efficiency Ratio (EER)	11.5
Refrigerant	R-410A
Sound Pressure Level (Outdoor)	55 dB(A)
Cooling Capacity	30, 000 BTU/h
Power Supply	208/230V, 1 Phase, 60Hz
Sound Pressure Level (Indoor)	45 dB(A)