York DF 072 User Manual

254599-YTG-C-0807
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
TECHNICAL GUIDE
SINGLE PACKAGE GAS/ELECTRIC UNITS
AND SINGLE PACKAGE
AIR CONDITIONERS
DF 072
6 NOMINAL TONS
10.4 EER
®
DESCRIPTION
YORK
®
Sunline Plus™ units are convertible single package
air conditioners. The units were designed for light commercial
and commercial applications. They can easily be installed on
a roof curb, slab, roof jack or frame.
All units include:
• Powder Paint finish that meets ASTM-B-117 1000 hour
salt spray standards
• Permanently lubricated motors
• Bottom or side air discharge configuration capability
(field convertible)
• Manufactured under the quality standards of ISO9001
• Simplicity
®
Control Board
• Copper tube/aluminum fin coils
• Easy access to all components
• Rigging holes in base rails for lifting
• Fork lift slots on three sides
• Single point power connection
• Complete factory package - tested, charged and wired
• CSA agency listing on all units
WARRANTY
• Factory Limited Parts Warranty
• One-year parts warranty
• A Five-year parts warranty on the compressor and
electric heat elements.
• Ten-year parts warranty on the gas-fired heat
exchangers.

York DF 072 Specifications

General

Brand	York
Model	DF 072
Category	Air Conditioner
Language	English

Summary

Product Description and Features

Unit Description

General overview of YORK Sunline Plus™ units for light commercial applications.

Unit Features

Details the general features and design aspects of the units.

Warranty Information

Outlines the limited parts warranty for the unit, compressor, and heat exchangers.

Product Nomenclature and Options

Product Nomenclature Breakdown

Explains the model number structure and its various coding components.

Factory Installed Options

Lists and describes options that are factory-installed on the units.

Field Installed Accessories

Outlines accessories available for field installation to customize unit functionality.

Technical Data and Installation Details

Typical Field Power & Control Wiring

Illustrates standard wiring configurations for unit control and power supply.

Unit Dimensions

Provides front and rear view dimensions for unit installation.

Minimum Clearances

Specifies the required minimum clearances around the unit for safe operation and maintenance.

Guide Specifications

General Specifications

Covers unit manufacturing standards, installation flexibility, and factory testing.

Unit Cabinet Construction

Describes the materials and finish used for the unit's cabinet construction.

Refrigerant Components

Details the compressor and coil specifications, including safety components.