York DNP024 User Manual

036-21366-007-A-1205
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
TECHNICAL GUIDE
AFFINITY™ SERIES
SINGLE PACKAGE GAS/ELECTRIC
AIR COOLED AIR CONDITIONERS
2 THRU 5 NOMINAL TON
DNP024, 030, 036, 042, 048 AND 060
13 SEER
®
DESCRIPTION
York
®
Affinity™ Series packaged cooling/heating air condi-
tioners are designed for outdoor installation. Only utility and
duct connections are required at the point of installation.
The gas-fired heaters have aluminized steel tubular heat
exchangers and hot surface to pilot ignition. They are avail-
able in natural gas with field conversion to propane.
FEATURING
• FACTORY MOUNTED TXV
• COOLING/GAS HEATING UNITS (NATURAL GAS OR
PROPANE)
• LOW PROFILE
• QUIET OPERATION
• COMMON FOOTPRINT
• OPTIONAL SLIDE IN MOTORIZED DAMPERS
• OPTIONAL SLIDE IN ECONOMIZERS
• OPTIONAL PROPANE CONVERSION KIT
• OPTIONAL HIGH ALTITUDE CONVERSION KIT
(NATURAL GAS/PROPANE)
• OPTIONAL LOW NOx KIT
• FULL PERIMETER BASE RAILS
• BOTTOM AND SIDE UTILITY CONNECTIONS
• 1” OR 2” CLEANABLE FILTERS STANDARD ON ALL
3 PHASE MODELS. OPTIONAL ON 1 PHASE MODELS
• WARRANTY - 1 PHASE
• 10 year compressor
• 20 year heat exchanger
• 5 year other parts
• WARRANTY - 3 PHASE
• 5 year compressor
• 10 year heat exchanger
• 1 year other parts

York DNP024 Specifications

General

Brand	York
Model	DNP024
Category	Air Conditioner
Language	English

Summary

Product Description and Warranty

Product Description

York Affinity Series packaged cooling/heating units for outdoor installation.

Warranty - 1 Phase

Warranty coverage for 1-phase models: compressor, heat exchanger, and other parts.

Warranty - 3 Phase

Warranty coverage for 3-phase models: compressor, heat exchanger, and other parts.

Standard Features and Benefits

Operating Efficiency

Details high operating efficiencies and minimum AFUE/SEER levels.

On-Site Flexibility

Highlights common cabinet design and convertible duct connections for installation.

Lower Installation Cost

Focuses on easy wiring, reduced space, and lighter weight.

Convertible Airflow Design

Explains conversion of bottom duct openings for side supply/return.

Low Operating Sound Level

Explains how airflow and components reduce sound.

Protected Compressor

Explains internal protection against high pressure and temperature.

Self-Diagnostic Fan Control Module

Notes reduced on-site troubleshooting time via self-diagnostic control.

Hot Surface to Pilot Ignition

Describes faster heat delivery and reliable ignition.

Field-Installed Accessories

Conversion Kits

Kits for low NOx, propane, and high altitude conversions.

Economizer and Sensor Options

Economizer kits and single/dual enthalpy sensor options.

Airflow and Damper Accessories

Fresh air dampers, adapters, and manual outdoor dampers.

Protection and Maintenance Kits

Hail guard, filter, and anti-short cycle timer kits.

Installation Accessories

Roof curbs and wall thermostats.

Low Ambient Kit

Kit for cooling operation down to 0° F.

Wiring Diagrams and Notes

Wiring Diagram DNP 024

Illustrates wiring for DNP 024, 208/230-1-60 supply.

Wiring Diagram DNP 030-048 (208/230-1-60)

Shows wiring for DNP 030-048, 208/230-1-60 supply.

Wiring Diagram DNP 030-048 (208/230-3-60)

Illustrates wiring for DNP 030-048, 208/230-3-60 supply.

Wiring Diagram DNP 060 (208/230-3-60)

Shows wiring for DNP 060, 208/230-3-60 supply.

Wiring Diagram DNP 030-048 (460/575-3-60)

Illustrates wiring for DNP 030-048, 460/575-3-60 supply.

Wiring Diagram DNP 060 (460/575-3-60)

Shows wiring for DNP 060, 460/575-3-60 supply.

Typical Wiring Diagram Notes

Provides essential notes and cautions for interpreting wiring diagrams.

Mechanical Specifications

General Unit Construction

Covers ISO certification, outdoor design, and gas heater features.

Unit Cabinet Details

Describes cabinet materials, finish, water shed top, coil guard, and insulation.

Indoor and Outdoor Fan Assemblies

Details fan types, motors, and accessibility for servicing.

Refrigerant Components

Covers compressors, coils, and refrigerant safety components like TXVs.

Unit Operating Characteristics

Specifies operating capabilities at high/low temperatures and accessory options.

Electrical Requirements

Details power and control wiring entry points.