York DJ 036 User Manual

036-21687-002-A-1105
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
SINGLE PACKAGE GAS/ELECTRIC UNITS
AND SINGLE PACKAGE
AIR CONDITIONERS
DJ 036, 048 & 060
3, 4 & 5 NOMINAL TONS
13.40 to 13.50 SEER
®
TECHNICAL GUIDE
DESCRIPTION
YORK Sunline Magnum™ units are convertible single pack-
age air conditioners with a common cabinet and a common
roof curb for the 3, 4 and 5 ton sizes. The units were
designed for light commercial and commercial applications.
They can easily be installed on a roof curb, slab, roof jack or
frame.
All units include:
• Powder Paint finish that meets ASTM-B-117 1000 hour
salt spray standards
• Permanently lubricated motors
• Bottom or side air discharge configuration capability
(field convertible)
• Manufactured under the quality standards of ISO9001
•
Simplicity
TM
Control Board
• Copper tube/aluminum fin coils
• Easy access to all components
• Rigging holes in base rails for lifting
• Fork lift slots on three sides
• Single point power connection
• Complete factory package - tested, charged and wired
• Belt Drive Indoor Blower
• CSA agency listing on all units
WARRANTY
• Factory Limited Parts Warranty
• One-year parts warranty
• A Five-year parts warranty on the compressor and
electric heat elements.
• Ten-year parts warranty on the gas-fired heat
exchangers.

York DJ 036 Specifications

General

Brand	York
Model	DJ 036
Category	Air Conditioner
Language	English

Summary

Product Description

Unit Features and Specifications

Details the YORK Sunline Magnum™ units, covering construction, capabilities, and controls.

Warranty Information

Outlines the warranty terms for compressors, heat exchangers, and other unit components.

Product Nomenclature

Model Number Breakdown

Explains the meaning of each character in the unit model number for identification.

Unit Features

Factory-Mounted Options Overview

Lists various factory-mounted options available for the units.

Factory-Installed Options

Economizers and Dampers

Details electronic enthalpy economizers and motorized outdoor air intake dampers.

Field-Installed Accessories

Available Accessories

Lists and describes field-installable accessories like roof curbs and conversion kits.

Wiring Diagrams

Power and Control Wiring

Illustrates power supply connections and control wiring for various thermostat types.

Installation Considerations

Utilities Entry and Clearances

Details utility entry points and required minimum installation clearances for safe operation.

GUIDE SPECIFICATIONS

General Unit Requirements

Covers general unit manufacturing, installation, and safety standards compliance.

Unit Cabinet and Fan Assemblies

Details cabinet construction, indoor/outdoor fan assembly specifications, and performance.

Refrigerant Components

Describes compressor protection, service connections, and refrigeration circuit requirements.

Gas and Electric Heating Sections

Details requirements for gas and electric heating sections, including safety features and operation.

Operating Characteristics and Electrical

Covers unit operating temperatures, electrical requirements, and safety devices.

Standard Limited Warranties

Specifies warranty periods for compressors, heat exchangers, and other unit parts.