Do you have a question about the York DJ 210 and is the answer not in the manual?
Brand | York |
---|---|
Model | DJ 210 |
Category | Air Conditioner |
Language | English |
Overview of York's convertible single package high efficiency rooftops.
Details on features like dual refrigerant circuits, powder paint finish, and safety controls.
Details the limited parts warranty for compressors, heat exchangers, and other components.
Breakdown of model number segments for configuration and options.
Details on available unit configuration options like BAS integration and filter types.
Explanation of installation options and specific unit feature codes.
Covers factory-mounted options and the self-contained unit assembly.
Explains safety features like low ambient control, anti-short cycle, and diagnostic alarms.
Summarizes warranty coverage and details on dual-stage gas heat operation.
Visual guide to unit components and factory-installed options like economizers.
Explains compatibility with various BAS systems like Simplicity® Intelli-Comfort™.
Details on Simplicity® Intelli-Comfort™, Novar®, Johnson Controls, CPC, and Honeywell BAS.
Table providing correction factors for altitude and temperature on air performance.
Examples demonstrating how to apply altitude correction factors for performance.
Electrical specifications including voltage, amperage, and heater options.
Electrical parameters for the 15-ton model without a convenience outlet.
Electrical parameters for the 20-ton model without a convenience outlet.
Electrical parameters for the 25-ton model without a convenience outlet.
Electrical specifications including voltage, amperage, and heater options with outlet.
Electrical parameters for the 15-ton model with a convenience outlet.
Electrical parameters for the 20-ton model with a convenience outlet.
Electrical parameters for the 25-ton model with a convenience outlet.
Provides dimensions, HP ratings, CFM, and other physical characteristics.
Illustrates control wiring for cooling only and cooling/heating thermostats.
Specifies minimum clearances for front, rear, sides, and below/above the unit.
Diagram illustrating the control wiring connections for Simplicity® thermostats.
Describes unit manufacturing, performance standards, and self-contained design.
Details on cabinet materials, insulation, and ease of maintenance access.
Covers expansion valves, filter driers, pressure switches, and hot gas bypass.
Summarizes the warranty periods for compressors, heat exchangers, and other parts.
Explains electronic enthalpy economizers, BAS-ready economizers, and motorized dampers.