GB
Technical specications
Model ENJC-D-R
Outdoor unit 09 12 18 24 30 36 42 48 60
Capacities
Cooling * kW
2.7
(1.2 - 3.0)
3.5
(1.6 - 3.6)
5.3
(1.6 - 5.8)
7.0
(2.0 - 7.7)
8.2
(2.7 - 8.3)
10.3
(3.5 - 11.5)
11.0
(3.5 - 13.0)
14.0
(4.9 - 14.1)
17.0
(4.0 - 17.5)
Heating * kW
2.9
(1.0 - 3.0)
3.8
(1.6 - 4.0)
6.2
(1.4 - 6.5)
7.5
(2.4 - 8.0)
8.8
(2.0 - 9.3)
11.5
(3.8 - 12.8)
12.4
(3.8 - 14.5)
16.5
(5.3 - 18.3)
18.0
(5.0 - 18.8)
Compressor Rotary
Refrigerant R-410A
Expansion/location Capillary/outdoor unit
Power supply V.ph.Hz 230.1.50
230.1.50
380.3.50
380.3.50
Consumption * Cooling / Heating kW 0.83 / 0.80 1.07 / 0.97 1.65 / 1.70 2.19 / 2.08 2.56 / 2.44 3.20 / 3.06 3.42 / 3.43 4.36 / 4.50 5.30 / 5.00
Outdoor noise level (1 m.) dB (A) 53 54 57 59 59 61 61 61 63
Outer dia. condensed water drain pipe mm 16.5
Nett Weight kg 28 30 48 65 68 86 90 122 127
Type of connection Flared + Nut
Tubing
Gas diameter 3/8” 3/8” 1/2" 5/8" 5/8" 5/8" 5/8" 5/8" 3/4”
Liquid diameter 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8”
Maximum tubing length m 20 20 20 30 30 30 50 50 50
Maximum elevation tubing m 15 15 15 15 15 15 30 30 30
Refrigerant load g 1 200 1 350 1 400 2 400 2 600 3 500 3 800 4 300 5 500
Nominal cooling capacity is based on: Indoor air temp. = 27°C DB/19°C WB. Outdoor air temp. = 35°C DB, 5-meter tubing.
Nominal heating capacity is based on : Indoor air temp. = 21°C DB - Outdoor air temp. = 7°C DB/6°C WB, 5-meter tubing.
* Data for duct indoor unit type
ATTENTION
Your product is marked with this symbol. This means that at the end of its service life it should not be mixed
with other non-classied household waste. Therefore, disposal should be carried out in compliance with the
corresponding local and national regulations, in a correct and environment-friendly manner.
The dismantling of the air conditioning unit, as well as the processing of refrigerant, oil and other components,
should be carried out by a qualied technician and in compliance with the applicable legislation.
Contact your local authorities for further information
All data and dimensions are subject to change without prior notice.