York H4RA018S06 - Page 2

261648-YTG-A-0706
2 Unitary Products Group
PHYSICAL AND ELECTRICAL DATA - 1 Phase
MODEL
H4RA018S06 H4RA024S06 H4RA030S06 H4RA036S06 H4RA042S06 H4RA048S06 H4RA060S06
Unit Supply Voltage 208-230V, 1φ, 60Hz
Normal Voltage Range
1
187 to 252
Minimum Circuit Ampacity 12.5 15.6 17.5 21.5 26.1 30.1 37.3
Max. Overcurrent Device Amps
2
20 25 30 35 40 45 60
Min. Overcurrent Device Amps
3
15 20 20 25 30 35 40
Compressor Type
4
RecipRecipRecipRecipRecipRecip
Scroll
B
Compressor
Amps
Rated Load 9.6 12.1 13.6 16.1 19.8 23 28.9
Locked Rotor 54 57 73 82 97 110 160
Crankcase Heater No No No No No No No
Fan Motor Amps Rated Load 0.5 0.5 0.5 1.4 1.4 1.3 1.3
Fan Diameter Inches 18 18 18 18 18 22 22
Fan Motor
Rated HP 1/12 1/12 1/12 1/4 1/4 1/4 1/4
Nominal RPM 1,100 1,100 1,100 1,100 1,100 850 850
Nominal CFM 1,850 1,850 1,900 2,750 2,750 3,250 3,300
Coil
Face Area Sq. Ft. 8.00 8.00 9.15 9.15 12.58 15.72 15.72
Rows Deep1111111
Fin / Inches 14 14 18 18 18 18 22
Liquid Line OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 3/8
Vapor Line OD (Field Installed) 3/4 3/4 3/4 3/4 3/4 7/8 7/8
Unit Charge (Lbs. - Oz.)
5
3 - 6 3 - 11 3 - 14 3 - 15 5 - 4 7 - 5 6 - 2
Charge Per Foot, Oz. 0.68 0.68 0.68 0.68 0.68 0.70 0.70
Operating Weight Lbs. 118 123 135 137 161 176 188
1. Rated in accordance with ARI Standard 110, utilization range “A”.
2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
4. All scrolls listed with a superscript “B” are Bristol scrolls. All scrolls listed with a superscript “C” are Copeland scrolls.
5. The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than 15
feet, add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.
C
A
B
DIMENSIONS
Unit
Model
Dimensions
(Inches)
Refrigerant
Connection
Service Valve Size
A
1
1. Including Fan Guard.
B C Liquid Vapor
018 17 35 23
3/8”
3/4”
024 17 35 23
030 19 35 23
036 19 35 23
042 25 35 23
048 27 37 27
7/8”
060 27 37 27