Do you have a question about the York H4TS048 and is the answer not in the manual?
Seasonal Energy Efficiency Ratio (SEER) | 16 |
---|---|
Refrigerant | R-410A |
Tonnage | 4 Tons |
Cooling Capacity | 48000 BTU/h |
Heating Capacity | 48000 BTU/h |
Heating Seasonal Performance Factor (HSPF) | 9.0 |
Power Supply | 208/230V, 1 Phase, 60Hz |
Explains the basic function of thermostats and features found in temperature indicators, selection, and fan/system mode.
Details the thermostat requirements for air conditioning systems designed solely for cooling operations.
Covers thermostats for systems capable of both cooling and heating.
Describes thermostats requiring manual switching between cooling and heating modes.
Explains advanced electronic thermostats with scheduling and energy-saving features.
Fan runs intermittently as needed for heating/cooling, providing lowest operating cost.
Indoor fan runs constantly, ensuring consistent air filtering and temperature distribution.
Allows running the fan only for ventilation on moderate days without heating or cooling.
Describes how the system operates for cooling and heating with a manual changeover thermostat.
Explains automatic system operation based on programmed settings for electronic thermostats.
Instructions for keeping the outdoor unit's coil clean and free from obstructions for proper airflow.
Guidance on inspecting and lubricating fan motors, including oil type and quantity.
Common issues to check before calling a service dealer, such as dirty filters or outdoor blockages.
Recommendations for inspecting, washing, or replacing air filters to ensure efficiency.
Minimum required clearances around the outdoor unit for proper operation and maintenance.
Information on where to obtain replacement parts for the system.
Details on available warranty packages to reduce potential service call costs.
Tips and advice for operating the system efficiently and saving energy.